M6 x 1.00p Metric Coarse Nickel Plated JCB Furniture Connector Socket (4mm Key) Screw Low Tensile Class 4.6
$6.00
In stock
SKU
51FC6_configurable
- Flat Head Furniture Bolts are commonly used in the furniture industry, especially flat pack furniture, signage and cabinet joinery. An aesthetically pleasing fastener due to the very low profile and wide head, shiny nickel coated finish and hex socket drive making it easy to install with a standard allen key or hex bit and a drill driver. A range of corresponding furniture nuts that if a through-hole needs to be used, it looks identical from both sides or a slotted barrel dowel nut are available. Also known as a JCB bolt or joint connector bolt
- Material / Coating: Nickel plated has a nice shiny appearance and is commonly used in furniture manufacturing. It is intended to be used internally
- Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter or length you may require, always refer to the size in the description and the additional specifications table provided prior to ordering
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Furniture Screw |
| Head Type | Flat Head |
| Size | M6 (6mm) |
| Size & Thread Pitch | M6 x 1.00p Coarse |
| Thread Pitch | 1.00mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Very Good |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Mild Steel |
| Finish | Nickel Plated |
| Length (l) | Select from the dropdown |
| Thread Length (t) | Choose your length to view |
| Product Diameter (d) | 5.70 - 6.00mm |
| Head Diameter (a) | 11.80 - 12.60mm |
| Thread Length | Provided as a guide, can vary between batches |
| Head Height (h) | 2.40 - 3.20mm |
| Suitable For | 12mm (Full Thread) |
| Drive Size | 4mm |
| Closest size in imperial | 1/4" |
| Brand | Hobson Engineering |
| Alternative Brands | Bolt and Nut Australia |
We found other products you might like!
