M27 (1-1/8") x 54.1mm x 3.4mm Galvanised HSFG Structural Washers High Tensile K0 AS1252.2016
$5.50
In stock
SKU
71G27GK0
- Buy 2 for $3.50 each and save 36%
- Buy 5 for $2.00 each and save 64%
- Buy 10 for $1.80 each and save 67%
- Buy 20 for $1.50 each and save 73%
- Buy 30 for $1.40 each and save 75%
- Buy 50 for $1.30 each and save 76%
- Buy 75 for $1.10 each and save 80%
- Buy 100 for $1.00 each and save 82%
- Buy 350 for $0.70 each and save 87%
- Buy 700 for $0.65 each and save 88%
- Buy 1050 for $0.62 each and save 89%
- Buy 1400 for $0.58 each and save 89%
- HSFG Structural Washers have 3 dimples on the outside of the washer to indicate they are structural washers. They were orginally designed to be used with structural bolts but now are also used with high tensile allthread and other high or even low tensile products. The washers can be seen in steel-to-steel structural connections in many buildings and bridge constructions across Australia
- New standard for Structural assemblies K0 AS1252:2016: This standard replaces the previous standard AS1252:1983/1996. The major change is the mandatory assembly testing. The assembly test requires all components of a structural assembly (bolt, nut and washer) to be tested together. Refer to the PDF's for further information
- Understanding and measuring washer sizing: Washer sizes can be a little confusing. The inside diameter of a M16 washer is greater than 16mm to allow the washer to fit over the bolt therefore M16 washers suit M16 bolts
- Are Metric & Imperial Washers Interchangeable?: In most cases they are which is why we have added metric sizing to the imperial range and imperial sizing to the metric range. If you are still unsure or if the washer dimensions are critical click on the washer you are interested in and view the technical specifications table before ordering
- Material / Coating: Galvanised is a dull greyish colour and can be a little rough in appearance and is mainly used outdoors because of its superior corrosion resistance and proven longevity. Also known as HDG, it is one of the best coatings for protection against rust. Galvanised fasteners have been used across many industries in Australia for over 150 years on steel buildings, bridges, trailers, bridges, farm equipment, power poles, marina’s etc
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and where possible to the relevant standard, however they should only be used as a guide. If you have an exact requirement or you see a problem with our specifications please contact us directly
- Dimensions: Our stock is sourced from various suppliers, differences can exist such as the inside dimension, outside diameter, thickness, visible stamped markings, appearance and actual finish
- Photos: represent the product, not the size. Our title has industry sizing but if additional information is required refer to the CAD drawing, Specifications Table or Technical Specifications PDF
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- PDF data sheet: The attached PDF data sheets are provided by the manufactuer as a reference guides, specifications may change without notice
- Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, ©Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 20,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | HSFG Structural K0 Washer |
| Industry Size | M27 (27mm) |
| Size | M27 (27mm) |
| To Suit Fastener Size | M27 | 1-1/8" |
| Corrosion Protection Level | Excellent |
| Class / Grade | High Tensile Class 8.8 |
| Material | High Tensile Steel 35-41 HRC |
| Finish | Galvanised |
| Inside Dimension (id) | 30.50 - 31.60mm |
| Outside Dimension (od) | 54.10 - 56.60mm |
| Thickness (t) | 3.30 - 3.90mm |
| Dimensional Data | Provided as a guide, subject to change |
| Standard Made To | K0 AS1252:2016 |
| Brand | Hobson Engineering |
| Alternative Brands | Brighton Best | Bremick Fasteners |
We found other products you might like!
