Aluminium Neo Cyclone Washer to suit 14g (6.3mm) Self Drilling Screws
$6.00
In stock
SKU
71CYBRA
- Buy 2 for $4.00 each and save 33%
- Buy 5 for $2.00 each and save 67%
- Buy 10 for $1.40 each and save 77%
- Buy 20 for $1.30 each and save 78%
- Buy 30 for $1.10 each and save 82%
- Buy 50 for $0.90 each and save 85%
- Buy 75 for $0.80 each and save 87%
- Buy 100 for $0.70 each and save 88%
- Buy 500 for $0.46 each and save 92%
- Buy 1000 for $0.38 each and save 94%
- Buy 2000 for $0.35 each and save 94%
- Buy 5000 for $0.30 each and save 95%
- Aluminium Bonded Multiseal BRA Cyclone Washers are for metal roof applications that require high strength, UV, ozone and corrosion resistance in cyclonic conditions. Also used in the insulated panel industry
- Applications: Suitable for crest fixing both corrugated, square rib & broad sheet roof profiles and Insulated panels
- To suit screw size: To suit 14g (6.3mm) self drilling metal and timber screws
- Are Metric & Imperial Washers Interchangeable?: In most cases they are which is why we have added metric sizing to the imperial range and imperial sizing to the metric range. If you are still unsure or if the washer dimensions are critical click on the washer you are interested in and view the technical specifications table before ordering
- Material / Coating: Made from high quality non-conductive EPDM rubber material with a aluminium backing that is ozone and UV resistant and high strength
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and where possible to the relevant standard, however they should only be used as a guide. If you have an exact requirement or you see a problem with our specifications please contact us directly
- Dimensions: Our stock is sourced from various suppliers, differences can exist such as the inside dimension, outside diameter, thickness, visible stamped markings, appearance and actual finish
- Photos: represent the product, not the size. Our title has industry sizing but if additional information is required refer to the CAD drawing, Specifications Table or Technical Specifications PDF
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Data and Technical Data Sheets: provided by ©Bolt &Nut Australia Pty Ltd are to be used as a reference guide only
- Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, ©Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 20,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Imperial |
|---|---|
| Product | Cyclone Multiseal BRA Washer |
| Industry Size | 14g x 25 x 9.75 |
| Size | 14g (6.30mm) |
| To Suit Fastener Size | 14g | 6.30mm Screw |
| Corrosion Protection Level | Ultimate |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Aluminium / EPDM |
| Finish | Silver / Black |
| Inside Dimension (id) | 5.30 -5.60mm |
| Outside Dimension (od) | 25.00mm |
| Thickness (t) | 9.75mm |
| Dimensional Data | Provided as a guide, subject to change |
| Brand | Bremick Fasteners |
| Alternative Brands | Hobson Engineering |