M3.5 x 7.6mm x 1.8mm Delta Protekt Zinc Flake Nord-Lock® Wedge Washer
$5.50
In stock
SKU
71NL3576DP
- Buy 2 for $3.80 each and save 31%
- Buy 5 for $3.00 each and save 45%
- Buy 10 for $2.80 each and save 49%
- Buy 20 for $2.60 each and save 53%
- Buy 30 for $2.50 each and save 55%
- Buy 50 for $2.30 each and save 58%
- Buy 75 for $2.20 each and save 60%
- Buy 100 for $2.10 each and save 62%
- Buy 500 for $1.90 each and save 65%
- Buy 1000 for $1.80 each and save 67%
- Nord-Lock® Wedge Washers secure bolts with tension instead of friction. The system cannot loosen unintentionally as it creates a wedge-effect underneath the bolt head or nut. The system comprises of a pair of wedge-lock washers with cams on one side and radial teeth on the opposite side
- Nord-Lock® offer the following advantages: Will not loosen under severe vibration or heavy dynamic loads > Reliable locking, even for joints with short clamp length > Quick and easy to install and remove > When untightening you can hear a click > High corrosion resistance with Delta Protekt® and Stainless Steel A4-70 G316 > Locking function not affected by lubrication > Reusable
- Traceability: Washers are laser marked with Nord-Lock brand name, control number and type code for traceability
- Understanding and measuring washer sizing: Washer sizes can be a little confusing. M6 suits a M6 bolt. The inside diameter of a M6 washer is greater than 6mm to allow the washer to fit over the bolt
- Are Metric & Imperial Washers Interchangeable?: In most cases they are which is why we have added metric sizing to the imperial range and imperial sizing to the metric range. If you are still unsure or if the washer dimensions are critical click on the washer you are interested in and view the technical specifications table before ordering
- Dimensions: Our stock is genuine Nord-Lock® product, sourced from Hobson Engineering, the Australian Distributor of Nord-Lock® Washers. Although the supply is consistent minor differences may exist between batches such as inside dimensions, outside thickness, visible stamping, appearance, packaging and actual finish
- Material / Coating: Delta Protekt® is an excellent coating. 1,000 hours is the minimum amount of time Nord-Lock steel washers with zinc flake coating by Delta Protekt® can withstand corrosion in a salt spray test. The regular quality testing that is done as part of ensuring high-quality standards, clearly shows that the washers consistently endure even longer hours. *According to ISO 12944-6:2018, 1,000 hours in a salt spray chamber correspond to approximately 25 years in C4 environment or approximately 15 years in C5 environment.
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and where possible to the relevant standard, however they should only be used as a guide. If you have an exact requirement or you see a problem with our specifications please contact us directly
- Dimensions: Differences can exist between batches such as the inside dimension, outside diameter, thickness, visible stamped markings, appearance and actual finish
- Photos: represent the product, not the size. Our title has industry sizing but if additional information is required refer to the CAD drawing, Specifications Table or Technical Specifications PDF
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- PDF data sheet: The attached PDF data sheets are provided by the manufactuer as a reference guides, specifications may change without notice
- Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, ©Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 20,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Nord-Lock® Wedge Washer |
| Industry Size | M3.5 x 7.6 x 1.8 |
| Size | M3.5 (3.5mm) |
| To Suit Fastener Size | M3.5 | #6 |
| Corrosion Protection Level | Excellent |
| Class / Grade | High Tensile Grade 12.9 |
| Material | High Tensile Steel |
| Finish | Delta Protekt Zinc Flake |
| Inside Dimension (id) | 3.90mm |
| Outside Dimension (od) | 7.60mm |
| Thickness (t) | 1.80mm |
| Temperature Range | -50°C to 200°C |
| Nord-lock Part Number | NL3,5 |
| Dimensional Data | Provided as a guide, subject to change |
| Brand | Nord-Lock® |
| Alternative Brands | Hobson Engineering |