M22 x 34.5mm x 3.2mm Stainless A4-70 G316 Nord-Lock® Wedge Washer
$30.00
In stock
SKU
71NLS22345M
- Buy 2 for $29.00 each and save 3%
- Buy 5 for $28.00 each and save 7%
- Buy 10 for $27.50 each and save 8%
- Buy 20 for $27.00 each and save 10%
- Buy 30 for $26.00 each and save 13%
- Buy 50 for $25.00 each and save 17%
- Buy 75 for $24.50 each and save 18%
- Buy 100 for $24.00 each and save 20%
- Nord-Lock® Wedge Washers secure bolts with tension instead of friction. The system cannot loosen unintentionally as it creates a wedge-effect underneath the bolt head or nut. The system comprises of a pair of wedge-lock washers with cams on one side and radial teeth on the opposite side
- Nord-Lock® offer the following advantages: Will not loosen under severe vibration or heavy dynamic loads > Reliable locking, even for joints with short clamp length > Quick and easy to install and remove > When untightening you can hear a click > High corrosion resistance with Delta Protekt® and Stainless Steel A4-70 G316 > Locking function not affected by lubrication > Reusable
- Traceability: Washers are laser marked with Nord-Lock brand name, control number and type code for traceability
- Understanding and measuring washer sizing: Washer sizes can be a little confusing. M6 suits a M6 bolt. The inside diameter of a M6 washer is greater than 6mm to allow the washer to fit over the bolt
- Are Metric & Imperial Washers Interchangeable?: In most cases they are which is why we have added metric sizing to the imperial range and imperial sizing to the metric range. If you are still unsure or if the washer dimensions are critical click on the washer you are interested in and view the technical specifications table before ordering
- Dimensions: Our stock is genuine Nord-Lock® product, sourced from Hobson Engineering, the Australian Distributor of Nord-Lock® Washers. Although the supply is consistent minor differences may exist between batches such as inside dimensions, outside thickness, visible stamping, appearance, packaging and actual finish
- Material / Coating: Marine Grade Stainless Steel A4-70 G316 is the ultimate corrosion resistance fastener. Designed to be used in all conditions. It is the best material to use in marine, coastal, chemical and food environments. Stainless steels are largely non-magnetic, but it is not uncommon for some stainless steel fasteners, especially stamped components like washers to show a small degree of magnetism. This is partly due to the work-hardening of the product during the manufacturing process. Marine Grade Stainless Steel A4-70 G316 can be easily identified by the following markings: A4, A4-70, A4-80, 316 or G316. Small sized washers are generally not stamped
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and where possible to the relevant standard, however they should only be used as a guide. If you have an exact requirement or you see a problem with our specifications please contact us directly
- Dimensions: Differences can exist between batches such as the inside dimension, outside diameter, thickness, visible stamped markings, appearance and actual finish
- Photos: represent the product, not the size. Our title has industry sizing but if additional information is required refer to the CAD drawing, Specifications Table or Technical Specifications PDF
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- PDF data sheet: The attached PDF data sheets are provided by the manufactuer as a reference guides, specifications may change without notice
- Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, ©Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 20,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Nord-Lock® Wedge Washer |
| Industry Size | M22 x 34.5 x 3.2 |
| Size | M22 (22mm) |
| To Suit Fastener Size | M22 | 7/8" |
| Corrosion Protection Level | Ultimate |
| Class / Grade | A4-70 G316 |
| Material | Stainless Steel |
| Inside Dimension (id) | 23.40mm |
| Outside Dimension (od) | 34.50mm |
| Thickness (t) | 3.20mm |
| Temperature Range | -50°C to 200°C |
| Nord-lock Part Number | NL22ss |
| Dimensional Data | Provided as a guide, subject to change |
| Brand | Nord-Lock® |
| Alternative Brands | Hobson Engineering |