M8 (5/16") x 16mm x 1.7mm Bumax 109 High Tensile Stainless A4-80 G316 Flat Washers
$6.00
In stock
SKU
71S816MB109
- Buy 2 for $5.00 each and save 17%
- Buy 5 for $4.40 each and save 27%
- Buy 10 for $4.20 each and save 30%
- Buy 20 for $4.00 each and save 33%
- Buy 30 for $3.80 each and save 37%
- Buy 50 for $3.60 each and save 40%
- Buy 75 for $3.40 each and save 43%
- Buy 100 for $3.20 each and save 47%
- Buy 200 for $2.80 each and save 53%
- Buy 500 for $2.50 each and save 58%
- Buy 1000 for $2.00 each and save 67%
- Buy 2000 for $1.80 each and save 70%
- Bumax is known as the strongest stainless steel fastener in the world. With the same class properites and strength as high tensile carbon steel 10.9 but with the added benefits of being made from stainless steel. BUMAX 109 is a premium A4 fastener that also offers far superior corrosion resistance than standard A4 due to its higher molybdenum content
- Features / Benefits:
- Products have full traceability
- Ultimate Corrosion resistance
- High Strength
- Higher yield strength and tighter tolerances
- Fatigue resistance
- Very low magnetic permability
- Manufactured to EN ISO 3506 standards
- Manufactured from a new variant of acid-proof Swedish steel SS 14.234
- Sourced solely from premium European stainless steel manufacturers according to rigid specifications
- Are Metric & Imperial Washers Interchangeable?: In most cases they are which is why we have added metric sizing to the imperial range and imperial sizing to the metric range. If you are still unsure or if the washer dimensions are critical click on the washer you are interested in and view the technical specifications table before ordering
- Material / Coating: High tensile class 10.9 marine grade stainless steel A4-80 G316 is the ultimate corrosion resistance fastener. Manufactured from a new variant of acid-proof Swedish steel SS 14.234 Bumax stainless steel A4-80 G316 can be identified by the unique A4 316 L 100 marking
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Differences may exist between batches such as inside dimension, outside diameter, thickness, visible stamped markings, appearance and actual finish
- Photos: Represent the product, not the size. For additional information, refer to the CAD drawing and/or View data sheet Library
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- PDF data sheet: PDF data sheets are provided as a reference guide only. Specifications may change without notice
- Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, ©Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 20,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Flat Round Washer |
| Industry Size | M8 x 16 x 1.7 |
| Size | M8 (8mm) |
| To Suit Fastener Size | M8 | 5/16" |
| Corrosion Protection Level | Ultimate |
| Class / Grade | A4-80 High Tensile G316 |
| Material | High Tensile Stainless Steel |
| Inside Dimension (id) | 8.60 - 9.20mm |
| Outside Dimension (od) | 16.00mm |
| Thickness (t) | 1.70mm |
| Dimensional Data | Provided as a guide, subject to change |
| Product has Manufacturers Markings | Yes |
| Standard Made To | ISO 7089 |
| Brand | Bumax |
| Alternative Brands | Hobson Engineering |