M5 (3/16") Stainless A2-70 G304 Countersunk External Serrated Tooth Lock Washers DIN 6798 Type V
$5.50
In stock
SKU
71LXCSS5
- Buy 2 for $3.00 each and save 45%
- Buy 5 for $1.40 each and save 75%
- Buy 10 for $0.80 each and save 85%
- Buy 20 for $0.50 each and save 91%
- Buy 30 for $0.40 each and save 93%
- Buy 50 for $0.26 each and save 95%
- Buy 75 for $0.20 each and save 96%
- Buy 100 for $0.18 each and save 97%
- Buy 200 for $0.15 each and save 97%
- Buy 500 for $0.14 each and save 97%
- Buy 1000 for $0.12 each and save 98%
- Countersunk External Serrated Tooth Lock Washers are designed to be used with countersunk head screws. The washers have sharp teeth which bite into the surface of the underside of the head of the screw and the material it is going into and when compressed, prevent loosening. Most effective when used with harder materials
- Also Known As: external lock washers, external tooth washers, star washer, fan washer
- Understanding and measuring washer sizing: Washer sizes can be a little confusing so we will do our best to try to make it a little easier to understand. When searching for a washer, firstly, let's say you have a M6 bolt and you want a matching washer, look for washers with M6 at the beginning of the description (you can speed this up by using our "shop by" filters). Washers are not precision fasteners and variations in sizing do exist and all measurements on our site should only be used as a guide
- Are Metric & Imperial Washers Interchangeable?: In most cases they are which is why we have added metric sizing to the imperial range and imperial sizing to the metric range. If you are still unsure or if the washer dimensions are critical click on the washer you are interested in and view the technical specifications table before ordering
- Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. Due to the shape and design serrated washers are not stamped. Stainless steels are largely non-magnetic but it is common for some stainless steel fasteners, especially stamped components like washers to show a small degree of magnetism which is a result of work-hardening during the manufacturing process
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and where possible to the relevant standard, however they should only be used as a guide. If you have an exact requirement or you see a problem with our specifications please contact us directly
- Dimensions: Our stock is sourced from various suppliers, differences can exist such as the inside dimension, outside diameter, thickness, visible stamped markings, appearance and actual finish
- Photos: represent the product, not the size. Our title has industry sizing but if additional information is required refer to the CAD drawing, Specifications Table or Technical Specifications PDF
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Data and Technical Data Sheets: provided by ©Bolt &Nut Australia Pty Ltd are to be used as a reference guide only
- Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, ©Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 20,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Countersunk External Serrated Tooth Lock Washer |
| Industry Size | M5 x 9.8 x 0.3 |
| Size | M5 (5mm) |
| To Suit Fastener Size | M5 | 3/16" | 10g | #10 | 2BA |
| Corrosion Protection Level | Excellent |
| Class / Grade | A2-70 G304 |
| Material | Stainless Steel |
| Inside Dimension (id) | 5.30 - 5.70mm |
| Outside Dimension (od) | 9.50 - 9.80mm |
| Unloaded Washer Height (h) | 2.55 - 2.65mm |
| Thickness (t) | 0.30 - 0.40mm |
| Approx Number of Teeth | 14 |
| Angle of Cup | 90° |
| Dimensional Data | Provided as a guide, subject to change |
| Standard Made To | DIN 6798 Type V |
| Brand | Bolt and Nut Australia |