M2 x 0.40p Metric Coarse Stainless A4-70 G316 Socket (T6) Machine Screws ISO 14579
$5.80
In stock
SKU
21TS2M_configurable
- Cap Head Torx Machine Screws are also known as star drive screws, they have a six-point star recess in the head that increases torque exertion, prevets cam out and boosts fastener life. The torx drive allows for a higher torque to be exerted than a similarly sized conventional hex socket head without damaging the head and/or the tool. Torx head sizes are described using the capital letter "T" followed by a number ranging from T1 to T100. This product shares similiar specifications to the socket allen screw range
- Material / Coating: Marine Grade Stainless Steel A4-70 G316 is the ultimate corrosion resistance fastener. Designed to be used in all conditions. The best fastener for marine, coastal, chemical and food environments. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from Hobson Engineering, different batches may have variations like visible stamped markings, appearance or actual finish
- Driver bits to suit: A large range of driver bits and tools are in the "Driving" and "Tools" section of our website
- Photos: represent the product, not the size. Our title has industry sizing but if additional information is required refer to the CAD drawing, Specifications Table or Technical Specifications PDF
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 20,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Machine Screw |
| Head Type | Cap Head |
| Size | M2 (2mm) |
| Size & Thread Pitch | M2 x 0.40p Coarse |
| Thread Pitch | 0.40mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Ultimate |
| Class / Grade | A4-70 G316 |
| Material | Stainless Steel |
| Length (l) | Select from the dropdown |
| Thread Length (t) | Choose your length to view |
| Product Diameter (d) | 1.86 - 2.00mm |
| Head Diameter (a) | 3.62 - 3.80mm |
| Head Height (h) | 1.86 - 2.00mm |
| Drive Size | T6 |
| Drive Type | Torx |
| Closest size in imperial | #1 |
| Standard Made To | ISO14579 |
| Brand | Bolt and Nut Australia |