5mm x 25mm Galvanised Mushroom Head H-IT Strike Anchor
$5.50
In stock
SKU
65MHIT525G
- Buy 2 for $2.75 each and save 50%
- Buy 5 for $1.20 each and save 78%
- Buy 10 for $0.70 each and save 87%
- Buy 20 for $0.45 each and save 92%
- Buy 50 for $0.24 each and save 96%
- Buy 100 for $0.22 each and save 96%
- Buy 200 for $0.20 each and save 96%
- Buy 500 for $0.19 each and save 97%
- Buy 700 for $0.18 each and save 97%
- Buy 1000 for $0.17 each and save 97%
- Buy 2000 for $0.16 each and save 97%
- H-IT Strike Anchors are a pre-expanded mechanism that is activated as the anchor is driven into the dilled hole and creates a spring type compression force against the walls of the hole.
- Features / Benefits:
- Available in mechanically galvanised carbon steel and G316 stainless steel variants
- Tamper-proof
- Pre-expanded design
- Simple hammer-in installation
- Time efficient installation
- Applications:
- For high corrosion resistance such as severe marine environments
- Fertilliser facilities
- Chemical and petrochemical plants
- Pharmaceutical and brewery plants
- Kitchens and food preparation
- Material / Coating: Galvanised is a dull greyish colour and can be a little rough in appearance and is mainly used outdoors because of its superior corrosion resistance and proven longevity. Also known as HDG, it is one of the best coatings for protection against rust. Galvanised fasteners have been used across many industries in Australia for over 150 years in construction, roofing, steel buildings, trailers, bridges, fencing, power poles, marina’s, are just a few examples. Recently we have seen a lot of new coatings developed, terms like class 3, class 4, B8, climseal, mechanical galvanised and ruspert which are all variations of the original galvanising
- Specifications: Every effort has been made to ensure all specifications on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
- PDF data sheets: The attached PDF data sheets has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 11+ years experience selling online, > 22,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| Product | H-IT Strike Anchors |
|---|---|
| Head Type | Mushroom Head |
| Size | M5 (5mm) |
| Anchor Length (l) | 25mm |
| Corrosion Protection Level | Excellent |
| Class / Grade | High Tensile Class 10.9 |
| Material | AISI 1040 Carbon Steel |
| Finish | Mechancial Galvanised |
| Head Diameter (a) | 11.00mm |
| Head Height (h) | 3.00mm |
| Drive Type | Hammer |
| Drill Hole Size | 5mm |
| Tightening Torque (Nm) | 32 MPA: 1.0kN |
| Minimum Edge Distance | 60mm |
| Minimum Embedment Depth | 20mm |
| Closest size in imperial | 3/16" |
| Brand | Hobson Engineering |
| Alternative Brands | Iccons |