Packs of 1000 - 6g (3.50mm) Zinc Yellow Collated Coarse Thread Bugle (PH2) Plasterboard Timber Screws
$34.00
In stock
SKU
07BUCCO_configurable
- Collated Plasterboard Screws for fixing plasterboard to light gauge steel up to 1mm without predrilling. Has a fine thread and feature a bugle shaped head which countersinks into plasterboard without crushing the core, or tearing the facepaper. Suitable for use in most auto feed screw guns
- Pack Size: ****SOLD in Boxes of 1000 *****
- Material / Coating: Zinc Yellow plated refers to the colour of the chromate that is applied after zinc has been applied. Yellow chromate increases the overall protection of the finish. The coating is intended to be used internally as it only offers an average level of protection against corrosion. If you want a fastener that will withstand the outdoor elements choose look for a Stainless steel or Galvanised fastener
- What does TPI stand for?: TPI stands for “threads per inch” which literally means the number of threads within each inch on a screw, a bolt, or a fastener. To determine the TPI of a screw, count the number of threads contained within an inch of length on the fastener. If the screw is less than an inch count ½” of an inch and multiply by 2
- How to measure the length of a Timber Screw: Fastener length is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Thread Length: have been included as a guide only. Due to stock being sourced from multiple suppliers variations do exist. We will always ship the same brand and thread length but subsequent orders may be another brand and the thread length may be different. If thread length is critical, please message us prior to ordering as we are happy to physically check our stock and advise prior to shipping
- Need a Driver Bit?: A large range of suitable driver bits are available in the "Driving" section of our website
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, length, thread length, colour you require, always refer to the size in the description and additional specifications data provided prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Screw Gauge |
|---|---|
| Product | Collated Plasterboard Timber Screw |
| Head Type | Bugle Head |
| Size | 6g (3.50mm) |
| Thread Pitch | 9 TPI |
| Thread Direction | Right Hand |
| Thread Type | Coarse |
| Corrosion Protection Level | Moderate |
| Class / Grade | Class 2 |
| Material | Carbon Steel SAE 1022 |
| Finish | Zinc Yellow |
| Product Diameter (d) | 3.40 - 3.50mm |
| Head Diameter (a) | 8.20 - 8.40mm |
| Screw Length (l) | Overall length measurement includes head, thread and drill point |
| Head Height (h) | 3.00 - 3.20mm |
| Drive Size | PH2 |
| Screw Point | Needle Point |
| Drive Type | Phillips |
| Single Shear (kN) | 3.0 |
| Axial Tensile (kN) | 5.1 |
| Torsional (Nm) | 3.4 |
| Recommended Drill Speed | 2500 |
| Closest size in mm | 3.50mm |
| Closest size in imperial | 0.14" |
| Material Application | Timber and Light Gauge Metal upto 1.2mm |
| Installation | Most auto feed screw guns |
| Standard Made To | AS3566 |
| Brand | Bremick Fasteners |
| Alternative Brands | Brighton Best |
We found other products you might like!
