10g (4.8mm) x 40mm B8® Bremick MultiONE™ Countersunk Truss Torx (T20) Multi Screws Treated Pine
As low as
$19.00
In stock
SKU
05MCTT1040_configurable
- Bremick MultiONE™ Countersunk Head Screws designed to fasten into Softwood, Hardwood, Treated Timbers, Composite Boards, Laminated Boards, Brick, Block, Concrete (predrilling is required) & Various Metals. It is the ultimate fastening solution for any job site applications & project
- User Installation Guide and Videos: Please refer to the installation guide PDF and Videos designed to help you get the most of the world's best fastener
- Features / Benefits:
- The widest range of materials can be drilled using just one screw
- Unique Thread Design engineered to fasten multiple materials with ease
- Torx compatible drive for positive bit engagement provides maximum application of torque
- TopGRIP™ thread locks materials together
- High Tech Drill Tip drills a perfect size hole for the screw making it super powerful, super strong
- Revolution B8 coating lasts 4x longer than Galvanising
- Material / Coating:
- Revolution™ Bremicks B8 coating lasts 4x longer than Galvanising
- Twice the corrosion protection of Class 4 and 8x the hardness of Class 4 coating
- Drills 28% faster than conventional Class 4 coating
- Smoother, finer & matched to ZINCALUME®
- Warrantied for category 5 environments
- How to determine the length: Fastener length is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Thread Length: Data has been provided to be used as a guide only. If thread length is critical, please message us prior to ordering as we are happy to physically check our stock and advise prior to shipping
- Driver Bit: Due to the unique nature of the drive and driver bit, for best results we recommend only using Bremick driver bits. There is 1x bit per box supplied. You can buy additional Bremick driver bits in our "Driving" section of our webiste
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Differences may exist between packaging, visible stamped markings, thread lengths or actual finish
- Photos: Are of the product but may not be the actual diameter, length or thread length. Always refer to the technical specifications table for additional information prior to ordering
- Updating our site: If you see any problems with any of our specifications please contact us directly
- Buy with confidence: ⇒ 11+ years experience selling online, > 22,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Screw Gauge |
|---|---|
| Product | Bremick MultiONE® |
| Head Type | Countersunk Head Ribbed |
| Nibbed | Slightly Nibbed |
| Underside of Head | Self Countersinking |
| Size | 10g (4.80mm) |
| Thread Direction | Right Hand |
| Thread Type | Coarse |
| Corrosion Protection Level | Ultimate |
| Class / Grade | B8® Cat 5 |
| Material | Hardened Steel |
| Finish | Revolution B8® Coating |
| Product Diameter (d) | 4.65 - 4.80mm |
| Head Diameter (a) | 7.83mm |
| Screw Length (l) | Overall length measurement includes head, thread and drill point |
| Thread Length Max (t) | Full Thread |
| Head Height (h) | 4.25mm |
| Drill Point Length (p) | 4.70mm |
| Drive Size | T20 |
| Screw Point | Multi Purpose High Tech Drill Tip |
| Drive Type | Torx |
| Driver Bit Included | Yes |
| Driver Bits | We recommend using the driver bit supplied for this product range |
| Single Shear (kN) | 8.3 |
| Axial Tensile (kN) | 10.6 |
| Torsional (Nm) | 11.4 |
| Recommended Drill Speed | Refer installation guide |
| Closest size in mm | 4.80mm |
| Material Application | Can be used on a huge range of materials |
| Installation | Refer installation guide |
| Standard Made To | AS3566 |
| Brand | Bremick Fasteners |