72 ANSS 6-8 (4.8 Ø x 16L) Anlock Countersunk ALL Steel Mega Lock Structural Rivet Grips 7.7-12.7mm
$8.00
In stock
SKU
72ANSS68
- Buy 5 for $1.60 each and save 80%
- Buy 10 for $1.40 each and save 83%
- Buy 20 for $1.30 each and save 84%
- Buy 30 for $1.10 each and save 86%
- Buy 50 for $0.90 each and save 89%
- Buy 100 for $0.80 each and save 90%
- Buy 200 for $0.50 each and save 94%
- Buy 500 for $0.44 each and save 95%
- Buy 1000 for $0.38 each and save 95%
- Buy 2000 for $0.34 each and save 96%
- Buy 5000 for $0.30 each and save 96%
- Buy 10000 for $0.28 each and save 97%
- Anlock Structural Rivet (Mega Lock) In-Bolt has a multi-grip clamping range used in the automotive industry, truck building, containers, construction work and coach and caravan vehicles
- Features / Benefits:
- One rivet can be installed into a wide range of material depths
- High shear & tensile strength, making them ideal in critical applications
- Superior holding power (Clamp up)
- Fastens over wide grip range
- Locking feature prevents loosening of mandrel from vibration
- Vibration & weather resistance solution, once installed they will never loosen
- Good watertight performance
- How Rivets Work: Using a structural rivet tool, the rivet is ‘set’ by drawing the stem through the shell, which causes the body to expand/compress to distort and clamp the material securely. After the desired clamping force is achieved, the stem breaks off at a predetermined position and is discarded. A small portion of the stem remains trapped in the bottom of the shell to ensure the clamping force is retained in the joint. Blind rivets are designed to clamp together specific thicknesses of material. If the grip range is less than it should be (the rivet is too long), excessive material will be left on the blind side and more pulls will be required to break-off the mandrel. If the grip range is too large (rivet is too short), insufficient material may be left on the blind side to secure the joint
- Material fixing to: As a general rule, the shell material of the rivet should be the same as the material under the head, ie, if aluminium is fastened to steel, use steel rivets. Part of the stem remains in the shell after setting. In the case of steel stems, this part may rust, an undesirable attribute in many circumstances. In these cases, choose a rivet with a stainless or aluminium stem
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as head dimensions, stem length, body length, grip range and actual material finish / colour
- Photos: are of the product but may not be the actual diameter, head size, stem or shell length you may require, always refer to the size in the title and the specifications table prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 22,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| Product | Anlock Mega Lock Rivet |
|---|---|
| Head Type | Countersunk Head |
| Rivet Code | 72 ANSS 6-8 |
| Size | 4.8mm (3/16") |
| Corrosion Protection Level | Moderate |
| Shell Material | Steel Zinc Plated |
| Stem Material | Steel Zinc Plated |
| Rivet Diameter | 4.8mm (3/16") |
| Stem Diameter (w) | 3.10mm |
| Stem Length (p) | 27.00mm |
| Head Diameter (b) | 9.20mm |
| Countersunk Angle (ca) | 120° |
| Shell Length (l) | 16.00mm |
| Material Grip Range (g) | 7.70 - 12.70mm |
| Hole Size | 4.90 - 5.10mm |
| Drill Size | 3/16" | 4.9mm | #11 |
| Head Height (h) | 2.10mm |
| Tensile Strength (kN) | 4000 |
| Shear Strength (kN) | 5400 |
| Brand | Tower |