2mm x 54mm Metric R Clip Humpback Pin Zinc Plated
$6.00
In stock
SKU
37HP254
- Buy 2 for $3.50 each and save 42%
- Buy 5 for $2.00 each and save 67%
- Buy 10 for $1.20 each and save 80%
- Buy 20 for $0.70 each and save 88%
- Buy 30 for $0.60 each and save 90%
- Buy 50 for $0.40 each and save 93%
- Buy 100 for $0.28 each and save 95%
- Buy 200 for $0.24 each and save 96%
- Buy 500 for $0.20 each and save 97%
- Buy 1000 for $0.18 each and save 97%
- Buy 2000 for $0.16 each and save 97%
- Buy 5000 for $0.14 each and save 98%
- R Clip Humpback Pins are used to secure the ends of round shapes such as axles and clevis pins. The straight leg of the R-clip is pushed into a hole near one end of the shaft until the semicircular part grips one side of the shaft resisting any force removing the R-clip
- Also known as: Pregnant Lady Pins, Retaining Pins
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shiny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. The coating is intended to be used internally as it only offers an average level of protection against corrosion
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Differences may exist between batches such as visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, >22,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | R Clip Pin |
| Size | M2 (2mm) |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Steel |
| Finish | Zinc Plated |
| Length (l) | 54mm |
| Inside Width (w) | 9.50mm |
| Shaft Size (b) | 3.50 - 4.10mm |
| Hole Size to Suit | 2.00mm |
| Brand | Hobson Engineering |
| Alternative Brands | Hitech Fasteners |