M2 (2mm) Metric Plain Parallel Dowel Pins Hardened DIN 6325
$6.00
In stock
SKU
37DP2P_configurable
- Dowel Pins are a hardened and precisely shaped pin used to keep machine components in accurate alignment, they are also used as location guides for adjacent machine parts and to keep the two sections of a punch and die in alignment. For a tight fit, your hole should be equal to or slightly smaller than the diameter shown. The length of the dowel pin is the overall measurement
- Length: Dowel Pins length is measured overall
- Material / Coating: Black or plain finish is unfinished (bare steel) has no actual protective coating. There may be an oil residue which provides some shelf life but no real corrosion protection when in use. The term “black” is an old industry term for plain. Depending on the material grade and heat treatment process the colour can vary from a shiny oily finish to a dull black
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Dowel Pin |
| Size | M2 (2mm) |
| Corrosion Protection Level | Poor |
| Class / Grade | High Tensile |
| Material | Hardened Alloy Steel |
| Finish | Plain Black Uncoated |
| Length (l) | Select from the dropdown |
| Length of Round End | 0.30mm |
| Length of Round End of Chamfer | 0.18mm |
| Crown Height | 0.60mm |
| Dowel Pin Dia. (d) | 2.003 - 2.008mm |
| Point Diameter (J) | 1.60 - 1.90mm |
| Rockwell Hardness | RC 60 Surface, RC 50-58 Core |
| Closest size in imperial | 5/64" |
| Standard Made To | DIN 6325 |
| Brand | Brighton Best |
| Alternative Brands | Hobson Enginnering |