2mm Zinc Silver Split / Cotter Pin (PinØ 1.8mm) DIN 94
$6.00
In stock
SKU
372_configurable
- Cotter Split Pins are a metal fastener with two prongs rather than one. The two prongs are typically bent during installation to hold an item in place. The pin must also be long enough to fit through the hole and have enough length left to bend and secure. Cotter pins are commonly used to hold machine parts in place by being inserted into corresponding holes of two different parts, then bending to hold them together. They are often refered to as either split pins or cotter pins
- To choose the right length: To choose the right length measure the length of the hole then compare this to the measurement of the shorter prong of your cotter pin (if the two prongs are not of equal length). You will need the length of the hole to be shorter than both pin’s prongs in order for the pin to work. Pins that are far too long can usually be cut down to size, offering some flexibility in this area. The size of a cotter pin is the diameter of the 2 pins. We recommend to always double check the sizing as the product title description is NOT the actual pin diameter but the hole size it is to be used on
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shiny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. The coating is intended to be used internally as it only offers an average level of protection against corrosion
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Cotter Split Pin |
| Size | M2 (2mm) |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Steel |
| Finish | Zinc Plated |
| Length (l) | Select from the dropdown |
| Eye Diameter | 3.20 - 3.60mm |
| Pin Diameter | 1.70 - 1.80mm |
| Hole Size to Suit | 2.00mm |
| Prong Length (a) | 1.30 - 2.50mm |
| Eye Length (b) | 4.00mm |
| Closest size in imperial | 5/64" |
| Standard Made To | DIN 94 |
| Brand | Hobson Engineering |
| Alternative Brands | Hitech Fasteners |