M3 x 0.50p x 12.6mm Metric Coarse Black Rubber Nut Large Flange Round Open Smooth Grip Range 0.4 - 4mm
$5.00
In stock
SKU
43RN31260
- Buy 2 for $3.50 each and save 30%
- Buy 5 for $1.80 each and save 64%
- Buy 10 for $1.20 each and save 76%
- Buy 20 for $1.00 each and save 80%
- Buy 30 for $0.90 each and save 82%
- Buy 50 for $0.80 each and save 84%
- Buy 100 for $0.70 each and save 86%
- Buy 200 for $0.60 each and save 88%
- Buy 500 for $0.55 each and save 89%
- What is a Nutsert | Riv Nut | Rivet Nut | Well Nuts: Finding a fastener that works with thin or brittle materials or where you cant get access from behind can be difficult. This is where nutserts, which are also known as a rivet nut, blind nuts, blind rivet nuts, rivnuts or threaded inserts, come in. A variation on the standard rivet, the rivet nut has a tubular round, splined or smooth body, square, or hexagonal body that is internally threaded and counterbored. As a blind fastener, the nutsert is installed in instances where only one side of the workpiece is accessible, making it incredibly versatile and popular
- Type: Large Flange Rubber Nuts are easy to install, simply drill a hole and slide the rubber nut into the hole with the flanged portion exposed, it important you first drill the right size hole and choose the right rubber nut for the thickness you are gripping. Then slide a machine screw of the correct size into the threading and tighten. As the machine screw or bolt is fastened, the rubber portion will deform and place a large amount of pressure on the bolt hole causing it to seal. They perform well where vibration could be an issue, or if a watertight seal is required. They do not produce electrical conductivity and can act as a buffer to prevent galvanic corrosion. Also known as a Well Nut
- Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: To ensure consistency, all of our nutserts are sourced from the same supplier. Therefore, we get very few differences in head dimensions, grip range, body length and actual material finish
- Photos: are of the product but may not be the actual diameter, head width, head thickness or body length you may require
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Rubber Nut |
| Head Type | Large Flange Head |
| Body Type | Round Open |
| Outside Body | Smooth |
| Size | M3 (3mm) |
| Size & Thread Pitch | M3 x 0.50p Coarse |
| Thread Pitch | 0.50mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Excellent |
| Finish | Black Rubber |
| Body Material | Themoplastic EPDM |
| Head Diameter | 11.00mm |
| Material Grip Range (g) | 0.40 - 4.00mm |
| Flange Thickness (h) | 1.40mm |
| Internal Nut Material | Brass Body |
| Nut Height Overall (b) | 12.60mm |
| Recommended Hole Size | 8.00mm |
| Closest size in imperial | 1/8" | #5 |
| Brand | Bolt and Nut Australia |