M24 x 3.00p Metric Coarse Zinc Class 4 Hex Thin Nyloc Nuts Low Tensile ISO 10511
$13.00
In stock
SKU
41NL24
- Buy 2 for $11.00 each and save 15%
- Buy 5 for $6.00 each and save 54%
- Buy 10 for $4.00 each and save 69%
- Buy 20 for $3.20 each and save 75%
- Buy 30 for $3.00 each and save 77%
- Buy 50 for $2.80 each and save 78%
- Buy 75 for $2.60 each and save 80%
- Buy 100 for $2.40 each and save 82%
- Buy 200 for $2.20 each and save 83%
- Hex Thin Nyloc nuts are hex shaped, internally threaded with a nylon insert. The nylon material prevents loosening from vibration and cross threads to stop the nut from backing off of the fastener. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut in two ways. First, it forces the bottom face of the screw threads against the top face of the nut threads, increasing the friction between the two. Second, the nylon applies a compressive force against the screw itself. They can also be used to assist sealing the bolt thread against seepage of oil, water, petrol, paraffin and other liquids. They come in a variety of materials
- Also known as: Hex Jam Nuts, Jam Lock Nuts, Half Nuts
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel range
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Thin Nyloc Nut |
| Size | M24 (24mm) |
| Size & Thread Pitch | M24 x 3.00p Coarse |
| Thread Pitch | 3.00mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 4 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Across Flats (af) | 35.16 - 36.00mm |
| Across Corners (ac) | 39.55 - 41.60mm |
| Nut Height Overall (b) | 16.90 - 17.50mm |
| Hex Height (h) | 10.90mm |
| Spanner Size | 36mm |
| Closest size in imperial | 1" |
| Standard Made To | ISO10511 |
| Brand | Hobson Engineering |