7/8" x 9 TPI UNC Coarse Plain Black Uncoated Grade 8 Hex Plow Nuts High Tensile HEC Standard
$16.00
In stock
SKU
41PC78P
- Buy 2 for $11.00 each and save 31%
- Buy 5 for $5.00 each and save 69%
- Buy 10 for $2.80 each and save 83%
- Buy 20 for $1.80 each and save 89%
- Buy 30 for $1.50 each and save 91%
- Buy 50 for $1.16 each and save 93%
- Buy 75 for $1.11 each and save 93%
- Buy 100 for $1.00 each and save 94%
- Buy 200 for $0.95 each and save 94%
- Hex Plow nuts is the matching nut for plow bolts. They are a high tensile heavy nut with 6 dimples on the face of the nut
- Suitable for: Plow Bolts
- Material / Coating: Black or plain finish is unfinished (bare steel) has no actual protective coating. There may be an oil residue which provides some shelf life but no real corrosion protection when in use. The term “black” is an old industry term for plain. Depending on the material grade and heat treatment process the colour can vary from a shiny oily finish to a dull black
- What does TPI stand for?: TPI stands for “threads per inch” which literally means the number of threads within each inch on a nut, a bolt, or a fastener. To determine the TPI of a nut, either count the number of threads contained within an inch of length on the male fastener or use a thread checker. If the male fastener is less than an inch, measure 1/2", count how many there are then multiply the number by 2
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Imperial |
|---|---|
| Product | Plow Nut |
| Size | 7/8" |
| Size & Thread Pitch | 7/8" x 9 TPI UNC |
| Thread Pitch | 9 TPI |
| Thread Direction | Right Hand |
| Thread Type | UNC / BSW - Coarse |
| Corrosion Protection Level | Poor |
| Class / Grade | High Tensile Grade 8 |
| Material | Carbon Steel |
| Finish | Plain Black Uncoated |
| Across Flats (af) | 1.269 - 1.312" (32.24 - 33.33mm) |
| Across Corners (ac) | 1.447 - 1.516" (36.76 - 38.51mm) |
| Nut Height Overall (b) | 0.724 - 0.776" (18.39 - 19.72mm) |
| Spanner Size | 1-5/16" |
| Closest size in mm | M22 (22mm) |
| Standard Made To | HEC / GR8 |
| Brand | Hobson Engineering |
We found other products you might like!
