M8 x 1.25p x 17.5mm Metric Coarse G304 Stainless Nutsert Countersunk Round Open Splined Grip Range 0.5 - 3mm
$5.00
In stock
SKU
43CS8SP
- Buy 2 for $3.85 each and save 23%
- Buy 5 for $2.20 each and save 56%
- Buy 10 for $1.32 each and save 74%
- Buy 20 for $1.10 each and save 78%
- Buy 30 for $1.00 each and save 80%
- Buy 50 for $0.90 each and save 82%
- Buy 100 for $0.80 each and save 84%
- Buy 200 for $0.69 each and save 86%
- Buy 500 for $0.63 each and save 87%
- Buy 1000 for $0.60 each and save 88%
- What is a Nutsert | Riv Nut | Rivet Nut: Finding a fastener that works with thin or brittle materials or where you cant get access from behind can be difficult. This is where nutserts, which are also known as a rivet nut, blind nuts, blind rivet nuts, rivnuts or threaded inserts, come in. A variation on the standard rivet, the rivet nut has a tubular round, splined or smooth body, square, or hexagonal body that is internally threaded and counterbored. As a blind fastener, the nutsert is installed in instances where only one side of the workpiece is accessible, making it incredibly versatile and popular
- Type: Countersunk Nutserts (Rivet Nut) have a low profile thin flange head which sits flush on the surface of material where it is being used. Splines on the outside of the body are to help reduce rotation during installation.
- Installing: To install, drill the required hole size, install nutsert using a suitable tool. It is important the hole size is correct and is the right length for the thickness you are gripping. Once installed it will provide maximum resistance
- Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. It is highly recommended to use Stainless Steel A4-70 G316 if the product is being used within 300 metres of the coast, in the food and chemical industry or within salt spray affected areas
- Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process
- Without the right tool Stainless nutserts can be extremely difficult to pull up, look in the tool section of our website to view a range suitable for nutserts from M3 - M12
- Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: To ensure consistency, all of our nutserts are sourced from the same supplier. Therefore, we get very few differences in head dimensions, grip range, body length and actual material finish
- Photos: are of the product but may not be the actual diameter, head width, head thickness or body length you may require
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Nutsert |
| Head Type | Countersunk Head |
| Body Type | Round Open |
| Outside Body | Splined | Knurled |
| Size | M8 (8mm) |
| Size & Thread Pitch | M8 x 1.25p Coarse |
| Thread Pitch | 1.25mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Excellent |
| Class / Grade | A2-70 G304 |
| Finish | Stainless Steel A2-70 G304 |
| Body Material | Stainless Steel |
| Head Diameter | 12.00mm |
| Nut Width (a) | 10.95mm |
| Material Grip Range (g) | 0.50 - 3.00mm |
| Flange Thickness (h) | 0.50mm |
| Nut Height Overall (b) | 17.50mm |
| Recommended Hole Size | 11.00mm |
| Push Out (kn) | 12.7 |
| Torque to Turn (Nm) | 29.4 |
| Pull Out (kn) | 29.4 |
| Closest size in imperial | 5/16" |
| Brand | Bolt and Nut Australia |