M12 x 1.75p x 27mm Metric Coarse Zinc Silver Nutsert Large Flange Full Hex Open Smooth Grip Range 1.5 - 5mm
$14.00
In stock
SKU
43LFFH12SM
- Buy 2 for $9.35 each and save 33%
- Buy 5 for $4.40 each and save 69%
- Buy 10 for $2.86 each and save 80%
- Buy 20 for $2.09 each and save 85%
- Buy 30 for $1.87 each and save 87%
- Buy 50 for $1.65 each and save 88%
- Buy 100 for $1.50 each and save 89%
- Buy 200 for $1.38 each and save 90%
- Buy 500 for $1.32 each and save 91%
- Buy 1000 for $1.25 each and save 91%
- What is a Nutsert | Riv Nut | Rivet Nut: Finding a fastener that works with thin or brittle materials or where you cant get access from behind can be difficult. This is where nutserts, which are also known as a rivet nut, blind nuts, blind rivet nuts, rivnuts or threaded inserts, come in. A variation on the standard rivet, the rivet nut has a tubular round, splined or smooth body, square, or hexagonal body that is internally threaded and counterbored. As a blind fastener, the nutsert is installed in instances where only one side of the workpiece is accessible, making it incredibly versatile and popular
- Type: Large Flange Nutserts (Rivet Nut) have a wider head with a thicker flange for high push applications.
- Installing: To use, punch a metric hexagon hole, install nutsert using a suitable tool. It is important the hole size is correct and is the right size for the thickness you are gripping. Once installed it will provide maximum resistance
- Material / Coating: Zinc Plated is the most common fastener plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isn’t recommended if corrosion is a concern. If you need a fastener that will withstand the outdoor elements or matching another material choose from our range of Aluminium or Stainless steel Nutserts
- Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: To ensure consistency, all of our nutserts are sourced from the same supplier. Therefore, we get very few differences in head dimensions, grip range, body length and actual material finish
- Photos: are of the product but may not be the actual diameter, head width, head thickness or body length you may require
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Nutsert |
| Head Type | Large Flange Head |
| Body Type | Full Hex Open |
| Outside Body | Smooth |
| Size | M12 (12mm) |
| Size & Thread Pitch | M12 x 1.75p Coarse |
| Thread Pitch | 1.75mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 4.6 |
| Finish | Zinc Plated |
| Body Material | Low Carbon Steel |
| Head Diameter | 23.00mm |
| Nut Width (a) | 16.00mm |
| Hex Hole (af) | 16.10mm |
| Material Grip Range (g) | 1.50 - 5.00mm |
| Flange Thickness (h) | 2.00mm |
| Nut Height Overall (b) | 27.00mm |
| Recommended Hole Size | 16.00mm |
| Push Out (kn) | 13.7 |
| Torque to Turn (Nm) | - |
| Pull Out (kn) | 49 |
| Closest size in imperial | 1/2" |
| Standard Made To | AISI 1010 1008 |
| Brand | Bolt and Nut Australia |