M10 x 1.50p Metric Coarse Zinc Flake Silver Class 12 Hex Flange Serrated Nuts High Tensile HEC Standard
$5.80
In stock
SKU
41FLD10ZF
- Buy 2 for $3.20 each and save 45%
- Buy 5 for $2.00 each and save 66%
- Buy 10 for $1.50 each and save 74%
- Buy 20 for $0.85 each and save 85%
- Buy 30 for $0.74 each and save 87%
- Buy 50 for $0.60 each and save 90%
- Buy 75 for $0.56 each and save 90%
- Buy 100 for $0.50 each and save 91%
- Buy 200 for $0.45 each and save 92%
- Buy 500 for $0.40 each and save 93%
- Buy 700 for $0.38 each and save 93%
- Buy 1000 for $0.36 each and save 94%
- Buy 2000 for $0.34 each and save 94%
- Hex Flange D-Lok serrated nuts have a wide flange that acts as a fixed, integrated washer, which helps distribute the pressure of the nut over the part being secured. The serrated surface on the underside of the flange provides a locking mechanism by angling into the substrate to keep the nut from rotating in the loosening direction
- D-lok Flange nuts are intended to be used with D-Lok Flange bolts
- Applications: Equipment and machinery with constant vibration, forklifts, truck and large vehicles, mining equipment, motor bikes, conveyors and materials handling equipment, defence and military vehicles
- Also known as: Stop Nuts, Polymer-insert Nuts, Spinlock Nuts, Whiz Nuts, Whizlock Nuts
- Material / Coating: D-Lok Bolts and Nuts are coated with a Zinc Flake Coating which is hydrogen embrittlement risk free. Prior to this coating being available there has always been a risk that if the high tensile bolt wasn't plated correctly, and it can be hard to tell either way, failure could occur. Zinc Flake Coating bolts from Hobson resolve this. Test certicates and reports are available upon request. The coating is relatively new to the fastener industry, it has a similiar colour and appearance to mechancial galvanising and in sea salt testing results showed to last approximately 25 years in C4 environment or approximately 15 years in C5 environment
- ***IMPORTANT****NOT COMPATIBLE WITH GALVANISED FASTENERS: Galvanised bolts and nuts are made oversize to fit Galvansied bolts & nuts due to the thickness of the plating, whilst their appearances are similiar they are not to be used on zinc flake product. The matching bolts to this product can be found by entering the following 53HFLD in the search bar
- Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Differences may exist between batches such as actual fastener measurements, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Flange Serrated Nut |
| Size | M10 (10mm) |
| Size & Thread Pitch | M10 x 1.50p Coarse |
| Thread Pitch | 1.50mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Excellent |
| Class / Grade | High Tensile Class 12 |
| Material | Carbon Steel |
| Finish | Zinc Flake Silver |
| Across Flats (af) | 14.73 - 15.00mm |
| Across Corners (ac) | 17.77mm |
| Flange Diameter (f) | 21.80mm |
| Nut Height Overall (b) | 9.15mm |
| Serrations under Head | Yes |
| Spanner Size | 15mm |
| Closest size in imperial | 3/8" |
| Standard Made To | HEC / CL12 |
| Brand | Hobson Engineering |
We found other products you might like!
-
M10 x 1.50p Metric Coarse Zinc Hex Set Screw / Hex Bolts Class 8.8 High Tensile AS 1110.1As low as $5.00 Regular Price $5.50
