M5 x 0.80p Metric Coarse Brass 1 Piece Dome Nuts Low Tensile DIN 1587
$6.00
In stock
SKU
41DB51P
- Buy 2 for $4.00 each and save 33%
- Buy 5 for $3.40 each and save 43%
- Buy 10 for $2.70 each and save 55%
- Buy 20 for $1.70 each and save 72%
- Buy 30 for $1.30 each and save 78%
- Buy 50 for $1.00 each and save 83%
- Buy 75 for $0.87 each and save 86%
- Buy 100 for $0.74 each and save 88%
- Buy 200 for $0.70 each and save 88%
- Buy 500 for $0.57 each and save 91%
- Buy 700 for $0.54 each and save 91%
- Buy 1000 for $0.50 each and save 92%
- Hex Dome Acorn 1 Piece nuts can be used alone or as a cap for a hex or jam nut, dome nuts serve a decorative purpose by concealing the threaded end of a fastener or acting as a cover for protruding, perhaps sharp threads. Some types are manufactured in two pieces and pressed together; others are milled from a single piece of metal. Aside from a possible slight difference in dimensions, both types of nuts are otherwise the same
- Also known as: Crown Nut, Blind Nut, Dome Cap Nut, Hex Cap Nuts, Acorn Nuts
- Material / Coating: Brass fasteners are used for their physical and aesthetic properties. Brass is utilised due to its high thermal conductivity and corrosion resistant properties. It is suitable for use in hot and cold environments, and resistant to water corrosion, making it a staple of industries such as heating and plumbing
- Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Dome Acorn 1 Piece Nut |
| Size | M5 (5mm) |
| Size & Thread Pitch | M5 x 0.80p Coarse |
| Thread Pitch | 0.80mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Ultimate |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Solid Brass |
| Across Flats (af) | 7.78 - 8.00mm |
| Across Corners (ac) | 8.79 - 9.24mm |
| Dome Head Width (c) | 7.50mm |
| Nut Height Overall (b) | 8.00mm |
| Hex Height (h) | 4.00mm |
| Internal Nut Depth (p) | 7.20mm |
| Spanner Size | 8mm |
| Closest size in imperial | 3/16" |
| Standard Made To | DIN1587 |
| Brand | Hitech Fasteners |
| Alternative Brands | Holdite Industries |
We found other products you might like!
