M16 x 2.00p Metric Coarse Galvanised Channel Strut Nuts Short Spring
$14.00
In stock
SKU
41SN16SG
- Buy 2 for $9.00 each and save 36%
- Buy 5 for $5.00 each and save 64%
- Buy 10 for $3.00 each and save 79%
- Buy 20 for $2.40 each and save 83%
- Buy 30 for $1.90 each and save 86%
- Buy 50 for $1.70 each and save 88%
- Buy 75 for $1.60 each and save 89%
- Buy 100 for $1.50 each and save 89%
- Buy 200 for $1.40 each and save 90%
- Buy 500 for $1.30 each and save 91%
- Buy 700 for $1.20 each and save 91%
- Buy 1000 for $1.10 each and save 92%
- Spring Strut / Channel nuts provides a secure anchor point in cable, tray and pipe support systems and other applications where are rectangular nut is required. Simply insert the nut into the trough of the channel, twist into position so that the grooves are aligned with the internal edges of the strut. Threading and tightening a screw into the hole causes teeth located in the grooves to bite into the channel edge, positively locking the nut in place so it can’t slip
- Suitable for: 21mm high channel
- Other applications: Roof Racks, Aluminium Extrusions
- Also known as: Channel Nuts, Strut Nuts
- Material / Coating: Galvanised is a dull greyish colour and can be a little rough in appearance and is mainly used outdoors because of its superior corrosion resistance and proven longevity. Also known as HDG, it is one of the best coatings for protection against rust. Galvanised fasteners have been used across many industries in Australia for over 150 years, roofing, steel buildings, trailers, bridges, fencing, power poles, marina’s, are just a few examples
- Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only and may not represent the actual diameter, height or width require. Actual product or packaging may vary due to product enhancement
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 22,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Strut / Channel Nut |
| Size | M16 (16mm) |
| Size & Thread Pitch | M16 x 2.00p Coarse |
| Thread Pitch | 2.00mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Excellent |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Carbon Steel |
| Finish | Galvanised |
| Nut Width (a) | 34.00 - 34.60mm |
| Nut Height Overall (b) | 10.70 - 11.40mm |
| Nut Length (l) | 28.00 - 30.00mm |
| Spring Length | Short Spring (20mm) |
| Closest size in imperial | 5/8" |
| Brand | Hobson Engineering |