M4 x 0.70p Metric Coarse Zinc Cage Nut to suit 0.70 - 1.60mm Panel
$6.00
In stock
SKU
41CN4
- Buy 2 for $3.50 each and save 42%
- Buy 5 for $2.00 each and save 67%
- Buy 10 for $1.50 each and save 75%
- Buy 20 for $1.10 each and save 82%
- Buy 30 for $1.00 each and save 83%
- Buy 50 for $0.90 each and save 85%
- Buy 75 for $0.72 each and save 88%
- Buy 100 for $0.60 each and save 90%
- Buy 200 for $0.55 each and save 91%
- Buy 500 for $0.50 each and save 92%
- Buy 1000 for $0.45 each and save 93%
- Buy 2000 for $0.35 each and save 94%
- A cage nut houses a standard nut in a cage with a spring. The cage has two wings that can be pinched together to allow the cage nut to be inserted into a square hole. The wings are then released to hold the cage nut in place. They can be inserted (in square holes) either with the flaps horizontal or vertical. It is easier to install and remove them using a purposed designedcage nut tool found online, if you only have a few to do you can use a screwdriver
- Main Applications: Server rack cabinets, switchboards and automotive
- Panel Range: Cage nuts are available in different grip ranges to suit various material thicknesses. To select the right size, measure the thickness of material then choose the nut that falls within the range. The range is in the title and on the specification table of this listing
- Material / Coating: Zinc Yellow plated refers to the colour of the chromate that is applied after zinc has been applied. Yellow chromate increases the overall protection of the finish. The coating is intended to be used internally as it only offers an average level of protection against corrosion
- Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Differences may exist between batches such as actual fastener measurements, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Cage Nut |
| Size | M4 (4mm) |
| Size & Thread Pitch | M4 x 0.70p Coarse |
| Thread Pitch | 0.70mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Carbon Steel |
| Finish | Zinc Yellow |
| Panel Hole Size | 9.50mm |
| Panel Thickness | 0.70 - 1.60mm |
| Nut Width (a) | 13.20mm |
| Nut Height Overall (b) | 9.00mm |
| Closest size in imperial | 5/32" |
| Brand | Bolt and Nut Australia |
We found other products you might like!
