M8 x 80mm Stainless A4-70 G316 Wedge Anchor Through Bolt
$7.00
In stock
SKU
65TBS880M
- Buy 2 for $5.00 each and save 29%
- Buy 5 for $4.60 each and save 34%
- Buy 10 for $3.60 each and save 49%
- Buy 20 for $3.15 each and save 55%
- Buy 30 for $2.54 each and save 64%
- Buy 50 for $2.16 each and save 69%
- Buy 75 for $1.94 each and save 72%
- Buy 100 for $1.85 each and save 74%
- Buy 200 for $1.67 each and save 76%
- Buy 500 for $1.43 each and save 80%
- Buy 1000 for $1.25 each and save 82%
- Wedge Anchor Through Bolts are one (1) piece heavy-duty pre-assembled torque controlled mechanical expansion anchor. When tightened the anchor draws the tapered end of the bolt into the expander clip forcing it out and creating expansion forces against the wall of the hole. Designed to be used in concrete, solid masonry and stone.
- Features / Benefits: Suitable for overhead applications and is removable. Ideal for fastening columns and beams. Perfect for quickly fixing steel and timber structures to a range of base materials: Concrete, Brick, Block, Marble, Stone. Suitable for both residential and commercial construction
- Material / Coating: Marine Grade Stainless Steel A4-70 G316 is the ultimate corrosion resistance fastener. Designed to be used in all conditions. The best fastener for marine, coastal, chemical and food environments. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- PDF data sheet: The attached PDF data sheet has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| Product | Wedge Anchor / Claw Bolt / Through Bolt |
|---|---|
| Size | M8 (8mm) |
| Size & Thread Pitch | M8 x 1.25p Coarse |
| Anchor Length (l) | 80mm |
| Bolt Diameter x Pitch | M8 x 1.25p Coarse |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Ultimate |
| Class / Grade | A4-70 G316 |
| Material | Stainless Steel |
| Spanner Size | 13mm |
| Drive Type | Hex |
| Drill Hole Size | 8mm |
| Tightening Torque (Nm) | 15Nm |
| Minimum Spacing | 40mm |
| Minimum Base Material Thickness | 100mm |
| Minimum Edge Distance | 50mm |
| Minimum Embedment Depth | 40mm |
| Minimum Hole Dia. on Fixture | 10mm |
| Standard Made To | ISO4032 |
| Brand | Hobson Engineering |
| Alternative Brands | Brighton Best | Bremick Fasteners | Inox World |
We found other products you might like!
