M5 x 50mm Zinc Yellow Cup Hook Spring Toggles
$14.00
In stock
SKU
65STCH550
- Buy 5 for $2.80 each and save 80%
- Buy 10 for $1.60 each and save 89%
- Buy 20 for $1.00 each and save 93%
- Buy 50 for $0.72 each and save 95%
- Buy 100 for $0.54 each and save 96%
- Buy 200 for $0.50 each and save 96%
- Buy 500 for $0.44 each and save 97%
- Buy 700 for $0.42 each and save 97%
- Buy 1000 for $0.40 each and save 97%
- Buy 2000 for $0.37 each and save 97%
- Spring Toggles are a fast and easy installation toggle with Maximum holding power in thin boards
- Features / Benefits: Fastening is achieved by passing the closed spring Toggle bar through the drilled hole and once inserted the spring is released to open Toggle bar behind the base material. Tightening of the screw draws the open Toggle bar up against the back face of the base material, resulting in a broad, postive interlocking connection and is removable with a screw driver. Secure interlocking and removable. Fire resistant
- Material / Coating: Zinc Yellow plated refers to the colour of the chromate that is applied after zinc has been applied. Yellow chromate increases the overall protection of the finish and is the preferred plating finish for most construction fasteners due to the good level of protection against corrosion. It can be used externally but doesnt offer the same protection as Galvanised or Stainless
- Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- PDF data sheet: The attached PDF data sheet has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| Product | Spring Toggle |
|---|---|
| Head Type | Hook |
| Size | M5 (5mm) |
| Anchor Length (l) | 50mm |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Grade 2 |
| Material | Carbon Steel |
| Finish | Zinc Yellow |
| Toggle Width (w) | 50mm |
| Max Fast Thickness (g) | 42mm |
| Fixing Screw (d) | M5 thread |
| Drill Hole Size | 14mm |
| Minimum Base Material Thickness | 8mm |
| Brand | Bremick Fasteners |
| Alternative Brands | Macsim |