6mm x 60mm Zinc Yellow Tie Wire Suspension Anchor
$5.00
In stock
SKU
65TWSA660
- Buy 2 for $3.50 each and save 30%
- Buy 5 for $1.60 each and save 68%
- Buy 10 for $1.10 each and save 78%
- Buy 20 for $0.90 each and save 82%
- Buy 30 for $0.80 each and save 84%
- Buy 50 for $0.70 each and save 86%
- Buy 75 for $0.65 each and save 87%
- Buy 100 for $0.50 each and save 90%
- Buy 200 for $0.40 each and save 92%
- Buy 500 for $0.36 each and save 93%
- Buy 1000 for $0.32 each and save 94%
- Buy 2000 for $0.30 each and save 94%
- Buy 5000 for $0.24 each and save 95%
- Tie Wire Suspension Anchors are a pre-assembled one piece tie wire sleeve anchor for the purpose of suspending ceilings, attaching cable ties and support conduit.
- Features / Benefits: High load capacity. Fast and simple installation. Can be loaded immediately after installation. Over head application. Suitable substrates are concrete and concrete block. Hole diameter equals body diameter. Gripping lugs on the expansion clip allow maximum setting capacity during the installation process
- Installation: After the anchor has been inserted into position, pull on the anchor with a claw hammer to complete the installation
- Material / Coating: Zinc Yellow plated refers to the colour of the chromate that is applied after zinc has been applied. Yellow chromate increases the overall protection of the finish and is the preferred plating finish for most construction fasteners due to the good level of protection against corrosion. It can be used externally but doesnt offer the same protection as Galvanised or Stainless
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- PDF data sheet: The attached PDF data sheet has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| Product | Suspension Anchor |
|---|---|
| Head Type | Tie Wire |
| Size | M6 (6mm) |
| Anchor Length (l) | 60mm |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 5.8 |
| Material | Carbon Steel |
| Finish | Zinc Yellow |
| Head Height (h) | 14mm |
| Eyelet Diameter (e) | 6mm |
| Drill Hole Size | 6mm |
| Drill Hole Depth | 45mm |
| Minimum Spacing | 90mm |
| Minimum Edge Distance | 45mm |
| Minimum Embedment Depth | 30mm |
| Closest size in imperial | 1/4" |
| Installation | Refer to data sheet |
| Standard Made To | DIN 6923, AS1789 |
| Brand | Hobson Engineering |
| Alternative Brands | Bremick Fasteners | Iccons |
We found other products you might like!
