10mm x 140mm Galvanised Mungo MB-SSF Frame Anchor Nylon Plug + Hex Screws
$9.00
In stock
SKU
65FA10140G
- Buy 2 for $8.00 each and save 11%
- Buy 5 for $6.40 each and save 29%
- Buy 10 for $5.40 each and save 40%
- Buy 20 for $5.00 each and save 44%
- Buy 30 for $4.90 each and save 46%
- Buy 50 for $4.30 each and save 52%
- Buy 75 for $3.60 each and save 60%
- Buy 100 for $3.40 each and save 62%
- Buy 200 for $3.20 each and save 64%
- Buy 500 for $3.00 each and save 67%
- Mungo Frame Anchors are a Heavy Duty Hex Screw and a Nylon Frame Anchor suitable for masonry and concrete in non-structural applications. Approved in perforated brick, masonry, aerated concrete, brick and sand-lime brick.
- Features / Benefits: ETAG 020 - Approved for multiple use in concrete and masonry for non-structural applications. Fire resistance test certification F90 for fastening of facade systems. MB with extended expansion zone for optimum applications in low density materials and hollow brick. Knock-in protection prevents premature expansion while installing. Wings on the nylon anchor help stop the plug rotating in the drill hole. Oversize plugs moulded in one-piece up to the overall length of 300mm, made from high-quality polyamide PA6
- Manufactured in: Made in Switzerland, the Mungo head office and production facility is in Olten located in central Switzerland. Mungo distributes products to more than 52 countries worldwide
- Material / Coating: Galvanised is a dull greyish colour and can be a little rough in appearance and is mainly used outdoors because of its superior corrosion resistance and proven longevity. Also known as HDG, it is one of the best coatings for protection against rust. Galvanised fasteners have been used across many industries in Australia for over 150 years in construction, roofing, steel buildings, trailers, bridges, fencing, power poles, marina’s, are just a few examples. Recently we have seen a lot of new coatings developed, terms like class 3, class 4, B8, climseal, mechanical galvanised and ruspert which are all variations of the original galvanising. The plug is made from high quality polyamide PA6 material
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- PDF data sheet: The attached PDF data sheet has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| Product | Nylon Frame Plug & Screw |
|---|---|
| Head Type | Hex Head |
| Size | M10 (10mm) |
| Anchor Length (l) | 140mm |
| Thread Type | Coarse |
| Corrosion Protection Level | Excellent |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Mild Steel |
| Finish | Galvanised |
| Plug Material | Nylon |
| Head Diameter (a) | 13mm |
| Plug Diameter (d) | 10mm |
| Spanner Size | 13mm |
| Drive Type | Hex |
| Drill Hole Size | 10mm |
| Drill Hole Depth | 80mm |
| Minimum Hole Dia. on Fixture | 10mm |
| Screw Effective Anchor Depth | 70mm |
| Brand | Mungo |
| Alternative Brands | Hobson Engineering |