M8 x 100mm Zinc Yellow Hex Flange (13mm AF) Xbolt Screwbolt Anchors
$7.00
In stock
SKU
65SB8100
- Buy 2 for $5.00 each and save 29%
- Buy 5 for $3.60 each and save 49%
- Buy 10 for $2.80 each and save 60%
- Buy 20 for $1.85 each and save 74%
- Buy 30 for $1.77 each and save 75%
- Buy 50 for $1.50 each and save 79%
- Buy 75 for $1.42 each and save 80%
- Buy 100 for $1.26 each and save 82%
- Buy 200 for $1.20 each and save 83%
- Buy 500 for $1.11 each and save 84%
- Buy 1000 for $1.05 each and save 85%
- Hex Flange Xbolt Screwbolt Anchors are an one-piece unit featuring a finished hex head formed with an integral washer. Suitable for any trade, carpenter, formworker, tie down applications, racking installers and construction. Can be used in concrete, lightweight concrete, hollow core concrete, block, brick and stone.
- Features / Benefits: Ideal general purpose anchor, even on temporary jobs as it’s completely removable. They are fast to install with immediate high strength loading with no expansion forces and are vibration resistant. Can be installed closer to the edge than traditional mechanical anchors and at a shallower embedment reducing the chance of striking reinforcing bars or embedded cables. Because of the design of the cutting thread, during installation it does not expand or put pressure on the surrounding substrates
- Material / Coating: Zinc Yellow plated refers to the colour of the chromate that is applied after zinc has been applied. Yellow chromate increases the overall protection of the finish and is the preferred plating finish for most construction fasteners due to the good level of protection against corrosion. It can be used externally but doesnt offer the same protection as Galvanised or Stainless
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- PDF data sheet: The attached PDF data sheet has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| Product | Screw Anchor / Screw Bolt / XBolt |
|---|---|
| Head Type | Hex Flange Head |
| Size | M8 (8mm) |
| Anchor Length (l) | 100mm |
| Thread Type | Coarse |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 5.8 |
| Material | Carbon Steel |
| Finish | Zinc Yellow |
| Thread Length (t) | Full Thread |
| Flange Diameter (f) | 17.90mm |
| Head Height (h) | 7.80 - 8.10mm |
| Max Fast Thickness (g) | 60mm |
| Spanner Size | 13mm |
| Drive Type | Hex |
| Drill Hole Size | 8mm |
| Minimum Spacing | 40mm |
| Minimum Edge Distance | 40mm |
| Minimum Embedment Depth | 40mm |
| Minimum Hole Dia. on Fixture | 11mm |
| Closest size in imperial | 5/16" |
| Brand | Hobson Engineering |
We found other products you might like!
