110 - 120mm Stainless A2-70 G304 Adjustable Toggle Latch
$20.00
In stock
SKU
62TLS110120
- Buy 2 for $19.00 each and save 5%
- Buy 5 for $16.61 each and save 17%
- Buy 10 for $15.80 each and save 21%
- Buy 20 for $14.30 each and save 29%
- Buy 30 for $13.54 each and save 32%
- Buy 50 for $12.76 each and save 36%
- Buy 100 for $11.86 each and save 41%
- Buy 200 for $11.49 each and save 43%
- Adjustable Toggle Latches are a mechanical piece of hardware which in locked position ensure secure fastening of two surfaces, panels or objects and when unlocked allow separation. The main components are the base plate with lever and attached loop and separate part the catch plate. The tension is created once loop is hooked onto the catch plate and lever clamped down. Tension is released when the handle is pullet up to vertical position
- Benefits / Features: Latch length can be adjusted by rotating the threaded screw. This way locking force can be adjusted as well. The patch has eye where a padlock can be attached to increase security and avoid unauthorized openings. A sealing pin instead of padlock could be used to avoid unintentional openings. The triangle screw eye loop is the most popular style.
- How toggle latches work: Toggle latch operating principle is calibrated system of levers and pivots. Toggle action has an over center lock point. Once it reaches over center position latch is securely locked in place. It cannot be moved or unlocked unless certain amount of force is used to pull the handle and get over the cam. Unlocking process is simple due to the leverage provided by the handle. Amount of power needed to unlock can be changed by adjusting screw loop length
- Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. It is highly recommended to use Stainless Steel A4-70 G316 if the product is being used within 300 metres of the coast, in the food and chemical industry or within salt spray affected areas. Most products can be identified by the following markings: A2, A2-70, 304 or G304. Stainless steels are largely non-magnetic but it is not uncommon for stainless steel fasteners to show a small degree of magnetism. This is partly due to the work-hardening of the product during the manufacturing process
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 22,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Kit Contains | 1x Toggle Latch and Keeper |
| Product | Toggle Latch |
| Size | 110mm - 120mm |
| Corrosion Protection Level | Excellent |
| Class / Grade | A2-70 G304 |
| Material | Stainless Steel |
| Length (l1) | 110 - 120mm |
| Keeper Width (b) | 35mm |
| Keeper Depth (a) | 25mm |
| Latch Width (d) | 20mm |
| Latch Fixing Plate Length (f) | 35mm |
| Latch Hole Dia. (c) | 5.50mm |
| Toggle Width (w) | 27.10mm |
| Screw Size to Suit | 6g & 8g CSK Screws and 1/8" CSK Rivets |
| Countersunk Screws Included | No |
| Closest size in imperial | 4-1/2" - 5" |
| Brand | Hobson Engineering |
| Alternative Brands | Inox World |