10mm x 57mm Stainless A2-70 G304 Linch Pins DIN 6799
$7.00
Out of stock
SKU
37SLP1057
- Buy 2 for $4.50 each and save 36%
- Buy 5 for $4.00 each and save 43%
- Buy 10 for $3.75 each and save 46%
- Buy 20 for $3.50 each and save 50%
- Buy 30 for $3.25 each and save 54%
- Buy 50 for $3.00 each and save 57%
- Buy 100 for $2.90 each and save 59%
- Linch Pins are a fastener used to prevent a part from sliding off a axle or part it is sitting on. Also known as a Lynch pin. The Linch Pin length is generally the measurement of the pin overall
- Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. It is highly recommended to use Stainless Steel A4-70 G316 if the product is being used within 300 metres of the coast, in the food and chemical industry or within salt spray affected areas. Most products can be identified by the following markings: A2, A2-70, 304 or G304. Stainless steels are largely non-magnetic but it is not uncommon for stainless steel fasteners to show a small degree of magnetism. This is partly due to the work-hardening of the product during the manufacturing process
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Linch Pin |
| Size | M10 (10mm) |
| Corrosion Protection Level | Excellent |
| Class / Grade | A2-70 G304 |
| Material | Stainless Steel |
| Length (l) | 57mm |
| Hole Size to Suit | 10.60mm |
| Nominal Pin Diameter | 10.00mm |
| Ring Diameter (e) | 3.10 - 3.20mm |
| Closest size in imperial | 25/64" |
| Standard Made To | DIN6799 |
| Brand | Inox World |