35 - 50mm x 9mm Stainless A2-70 G304 Hose Clamp Worm Drive Universal Perforated Band
$6.00
In stock
SKU
74HCS35509I
- Buy 2 for $5.00 each and save 17%
- Buy 5 for $3.40 each and save 43%
- Buy 10 for $2.40 each and save 60%
- Buy 20 for $2.20 each and save 63%
- Buy 50 for $1.90 each and save 68%
- Buy 100 for $1.80 each and save 70%
- Buy 200 for $1.60 each and save 73%
- Buy 500 for $1.50 each and save 75%
- Buy 1000 for $1.40 each and save 77%
- Hose Clamps are designed to secure a hose over a fitting, by clamping the hose down, it prevents the fluid in the hose leaking at the connection
- Caring for your hose clamps: Don’t over tighten your clamps, as this can cause serious pressure problems later on. Choose a clamp that is not too big. Whilst too-large clamps may potentially still do the job just fine, they can be both aesthetically displeasing, as well as pose a safety risk
- Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. It is highly recommended to use Stainless Steel A4-70 G316 if the product is being used within 300 metres of the coast, in the food and chemical industry or within salt spray affected areas. Most products can be identified by the following markings: A2, A2-70, 304 or G304. Stainless steels are largely non-magnetic but it is not uncommon for stainless steel fasteners to show a small degree of magnetism. This is partly due to the work-hardening of the product during the manufacturing process
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel
| System of Measurement | Metric |
|---|---|
| Product | Hose Clamp |
| Size | 35mm to 50mm |
| Corrosion Protection Level | Excellent |
| Class / Grade | A2-70 G304 |
| Material | Stainless Steel |
| Clamp Style | Worm Drive Perforated |
| Clamp Size Range (s) | 35mm to 50mm |
| Clamp Width MAX (a) | 14mm |
| Band Width (b) | 9mm |
| Standard Made To | DIN 3017 |
| Brand | Inox World |