16mm Zinc Half Conduit Electrical Saddles
$5.00
In stock
SKU
95SAH16
- Buy 2 for $3.00 each and save 40%
- Buy 5 for $2.00 each and save 60%
- Buy 10 for $1.40 each and save 72%
- Buy 20 for $0.90 each and save 82%
- Buy 30 for $0.67 each and save 87%
- Buy 50 for $0.46 each and save 91%
- Buy 100 for $0.32 each and save 94%
- Buy 200 for $0.29 each and save 94%
- Buy 300 for $0.26 each and save 95%
- Buy 500 for $0.24 each and save 95%
- Buy 1000 for $0.22 each and save 96%
- Half Conduit Electrical Saddles are suitable for fixing 16mm conduit to many surfaces
- Benefits / Features: Can be used internally and externally
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shiny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. The coating is intended to be used internally as it only offers an average level of protection against corrosion
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 22,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Half Conduit Saddle |
| Size | M16 (16mm) |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Steel |
| Finish | Zinc Plated |
| Height Overall (h) | 17mm |
| Width (a) | 17mm |
| Hole Size (c) | 6.80mm |
| Closest size in imperial | 5/8" |
| Brand | Bolt and Nut Australia |