M1.6 x 0.35p Metric Coarse Zinc Pan Phillips (PH0) Machine Screws AS 1427
$5.00
In stock
SKU
21P1.6_configurable
- Pan Phillips Machine Screws can be used to fasten components together by means of through holes and securing with a nut at the other end or they are screwed into a tapped hole with the matching thread
- Machine screws are fully threaded and have uniformly threads, meaning they maintain the exact same diameter throughout the entire length of the threaded section of the fastener, unlike self tapping or chipboard screws which have tapered threads. As the name suggests, these screws can be used to fasten components in machines, tools, appliances and electronic devices. They are one of the most popular fasteners we sell
- Also known as: Metal Thread, Stove Bolt, Pan Head, Dome Head
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally, whilst some people use it externally it isnt recommended if corrosion may be a concern, instead search our Stainless steel range
- Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Driver Bits: A large range of suitable driver bits are in the " Driving" section of our website
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: Are of the product but may not be the actual diameter, head size or length you require, always refer to the size in the description and additional specifications data provided prior to ordering
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Machine Screw |
| Head Type | Pan Head |
| Size | M1.6 (1.6mm) |
| Size & Thread Pitch | M1.6 x 0.35p Coarse |
| Thread Pitch | 0.35mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Length (l) | Select from the dropdown |
| Thread Length (t) | Full Thread |
| Product Diameter (d) | 1.49 - 1.58mm |
| Head Diameter (a) | 2.90 - 3.20mm |
| Head Height (h) | 1.18 - 1.42mm |
| Drive Size | PH0 |
| Drive Type | Phillips |
| Diameter in Imperial | 0-80 |
| Closest size in imperial | #0 |
| Standard Made To | AS1427 |
| Brand | Hobson Engineering |
| Alternative Brands | Hitech Fasteners | Holdite Industries |
We found other products you might like!
