M6 x 9.8mm (D) x 10mm (L) Metric Coarse Zinc Cross Dowel Slotted JCB Barrel Nuts Low Tensile
$5.80
In stock
SKU
41FBSL61010
- Buy 2 for $4.00 each and save 31%
- Buy 5 for $2.00 each and save 66%
- Buy 10 for $1.60 each and save 72%
- Buy 20 for $1.00 each and save 83%
- Buy 30 for $0.94 each and save 84%
- Buy 50 for $0.78 each and save 87%
- Buy 75 for $0.58 each and save 90%
- Buy 100 for $0.45 each and save 92%
- Buy 200 for $0.40 each and save 93%
- Buy 500 for $0.35 each and save 94%
- JCB Slotted cross dowel nuts are a concealed fixing cross dowel which forms part of a 2-piece joining system with Connector Bolts. They are used for joining two perpendicular pieces of timber where access is available after inserting bolt.
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern
- Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | JCB Cross Dowel Nut |
| Size | M6 (6mm) |
| Size & Thread Pitch | M6 x 1.00p Coarse |
| Thread Pitch | 1.00mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Body Diameter (n) | 9.80mm |
| Nut Height Overall (b) | 10.20mm |
| Drive Type | Slot |
| Closest size in imperial | 1/4" |
| Brand | Bolt and Nut Australia |