1/16" x 44mm Imperial Hex Allen Wrench Key Plain Black Uncoated Din 911
$6.00
In stock
SKU
35AKS116P
- Buy 2 for $3.50 each and save 42%
- Buy 5 for $1.80 each and save 70%
- Buy 10 for $1.10 each and save 82%
- Buy 20 for $0.75 each and save 88%
- Buy 50 for $0.50 each and save 92%
- Buy 100 for $0.28 each and save 95%
- Buy 200 for $0.20 each and save 97%
- Buy 500 for $0.16 each and save 97%
- Buy 1000 for $0.14 each and save 98%
- Short Arm Hex Allen Key are made from high tensile hardened steel, with blunt ends that are meant to fit snugly into the screw's socket, bent in an "L" shape with unequal arms. The tool is usually held and twisted by the long arm, creating a large torque at the tip of the short arm. Reversing the tool lets the long arm reach screws in hard-to-reach places. It’s important to choose the right size hex key, as attempting to use one that’s too big may damage the fastener or tool
- Material / Coating: Black or plain finish is unfinished (bare steel) has no actual protective coating. You will not have any corrosion resistance and the product will rust over time. The term “black” is an old industry term for plain finish. Depending on the material grade and heat treatment process the colour can vary from a shiny oily finish to a dull black
- Key Length: Hex key size is a measurement of the across-flats (AF), which is the distance between two opposite (parallel) flat sides of the key
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as key lengths, visible stamped markings, appearance or actual finish
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim for damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications, photos or you require additional information please contact us
- Photos: All photos are for illustration purpose only. Actual product or packaging may vary due to product enhancement
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Imperial |
|---|---|
| Product | Allen Key |
| Type | Hex T Handle |
| Size | 1/16" |
| Corrosion Protection Level | Poor |
| Class / Grade | High Tensile |
| Material | Alloy Steel Heat Treated |
| Finish | Plain Black Uncoated |
| Length of short arm (b) | 12.00 - 17.00mm |
| Length (l) | 44mm |
| Length of long arm (l) | 39.00 - 47.00mm |
| Width Across Flats (f) | 1.60 - 2.00mm |
| Width Across Corners (c) | 1.73 - 1.78mm |
| Drive Type | Hex |
| Radius of Bend (r) | 1.58mm |
| Standard Made To | DIN 911 |
| Brand | Brighton Best |
| Alternative Brands | Hobson Engineering | Bremick Fasteners |