M10 x 1.50p Metric Coarse Zinc Flake Silver (15mm AF) Hex Flange D-Lok Bolts Class 12.9 High Tensile
$7.00
In stock
SKU
53HFLD10129ZF_configurable
- Hex Flange D-Lok Bolts are the highest strength hex head metric bolts we stock, they are approx. 20% stronger than a class 10.9 and 40% than class 8.8. The bolts feature a flange under the head which eliminates the need for a separate washer and are serrated to lock and clamp the connection. It is fatigue resistant and re-usable with no decrease in performance
- Applications: Equipment and machinery with constant vibration, forklifts, truck and large vehicles, mining equipment, motor bikes, conveyors and materials handling equipment, defence and military vehicles
- Material / Coating: D-Lok bolts and nuts are coated with a Zinc Flake Coating which is hydrogen embrittlement risk free. Prior to this coating being available there has always been a risk that if the high tensile bolt wasn't plated correctly, and it can be hard to tell either way, failure could occur. Zinc Flake Coating bolts from Hobson resolve this. Test certicates and reports are available upon request. The coating is relatively new to the fastener industry, it has a similiar colour and appearance to mechancial galvanising and in sea salt testing results showed to last approximately 25 years in C4 environment or approximately 15 years in C5 environment
- ***IMPORTANT****NOT COMPATIBLE WITH GALVANISED FASTENERS: Galvanised bolts and nuts are made oversize to fit Galvansied bolts & nuts due to the thickness of the plating, whilst their appearances are similiar they are not to be used on zinc flake product. The matching nuts to this product can be found by entering the following 41FLD in the search bar
- Material Strength: Bolts are made to class strength 12.9. They have a yield strength of 1220 and the tensile strength is 1220 Mpa compared to 8.8 yield strength of 640 and the tensile strength is 800Mpa
- Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Differences may exist between batches such as actual fastener measurements, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | D-Lock Hex Flange Bolt |
| Head Type | Hex Flange Head |
| Size | M10 (10mm) |
| Size & Thread Pitch | M10 x 1.50p Coarse |
| Thread Pitch | 1.50mm |
| Thread Direction | Right Hand |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Excellent |
| Class / Grade | High Tensile Class 12.9 |
| Material | Carbon Steel |
| Finish | Zinc Flake Silver |
| Length (l) | Select from the dropdown |
| Product Diameter (d) | 9.78 - 10.00mm |
| Thread Length | Choose your length to view |
| Across Flats (af) | 14.73 - 15.00mm |
| Across Corners (ac) | 16.70mm |
| Flange Diameter (f) | 20.70- 21.30mm |
| Head Height (h) | 9.20mm |
| Serrations under Head | Yes |
| Spanner Size | 15mm |
| Drive Type | Hex |
| Closest size in imperial | 3/8" |
| Standard Made To | HEC / CL12.9 |
| Brand | Hobson Engineering |
We found other products you might like!
