345 Piece M3 Socket Cap Nut Washer High Tensile Zinc Assortment Grab Kit158
$40.00
In stock
SKU
KIT158K
- Buy 2 for $33.00 each and save 18%
- Socket Screws assortment grab kit containing a variety of popular sizes of Socket head cap screws which are ideal when space is limited with easy access to the drive along with the highest strength rating of most fasteners. They are easy to identify due to their unique head style and smart appearance. The top of the cylindrical Head on a socket head cap screw is flat and chamfered, the side may be plain or knurled and the bearing surface is flat. Use a hex key also called an Allen wrench or hex power bit to drive a Socket screw. They are either full or part thread and have uniformly threads, meaning they maintain the exact same diameter throughout the entire length of the threaded section of the fastener, unlike Self Tapping or Chipboard Screws which have tapered threads. They are one of our most popular fasteners.
- Also known as: Socket Head Allen Bolts, Socket Hex Cap Screws, Cap Screws, Allen Bolt, Socket Screws, SHCS.
- Handpicked in Brisbane Australia: This kit has been hand picked, assembled and packed with care in our Brisbane warehouse. Packed in a tough clear plastic container, the kit contains some of our most popular sizes designed for service, repair and new installations. Replacement packs are available on our website, in different pack configurations to suit the DIYer to the large manufacturer.
- Quantities in the Kits: The kits are handpicked in-house by our staff, there may be a small variation with the quantities per item due to weight or human error, the overall total number of pieces inside the kit should always exceed the total quantity advertised
- Washer Sizing: The washer size is to suit the corresponding bolt size, it is NOT the inside measurement, e.g M10 x 21 x 1.2 Flat Washer has an inside hole size between approx. 10.50 ~ 10.77mm. This applies to all types of washers, Metric and Imperial
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel range
- How to measure a fastener: Fastener length is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide.
- Photos: Photos are a representation of the product, variations may exists with thread lengths, actual material finish and dimensions
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as head dimensions, thread lengths visible stamped head markings, appearance or actual finish
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Metric |
|---|---|
| Product | Socket Screws Assortment Kit |
| Head Type | Cap Head |
| Kit Type | Socket Screws |
| Size | M3 (3mm) |
| Thread Type | Metric - Coarse |
| Corrosion Protection Level | Moderate |
| Class / Grade | High Tensile Class 12.9 |
| Material | Alloy Steel |
| Finish | Zinc Plated |
| Sizes In Kit | M3 |
| Nuts Supplied | Hex Nyloc |
| Washers Supplied | High Tensile Flat |
| Nyloc Nut Size and Qty | M3 - 115 Pieces |
| Flat Washer Size and Qty | M3 x 7 - 115 Pieces |
| Socket Screw Size and Qty | M3 x 6 - 30 Pieces, M3 x 10 - 25 Pieces, M3 x 16 - 20 Pieces, M3 x 20 - 20 Pieces, M3 x 25 - 20 Pieces |
| Approx No of Pieces In Kit | 1 Kit contains approx 345 Pieces |
| Drive Type | Internal Hex |
| Packaging | 5 Slot Australian Made Fischer |
| Packaging Dimensions | W188 x D118 x H31mm |
| Country of Origin | Assembled In Brisbane using Overseas Product |
| Brand | Bolt and Nut Australia |