500 Piece 4g 6g 8g 10g 12g Pan Pozi Self Tapping Screw Zinc Torres Assortment Grab Kit HAK01
$58.00
In stock
SKU
KITHAK01
- Buy 2 for $51.00 each and save 12%
- Self Tapping Screws assortment grab kit is part of the Torres hardware assortment pack range which we are proud distributors of. The hardware range has a large selection of products for every application at a great value. There are a total of 63 different Torres kits to choose from and 265 of our own assembled in Brisbane kits in our store, all at an price point to suit every budget.
- Quantities in the Kits: The kits are hand assembled, there may be a small variation with the quantities per item due to weight or human error, the overall total number of pieces inside the kit should always exceed the total quantity advertised
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel range
- How to measure a fastener: Fastener length is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide.
- Photos: Photos are a representation of the product, variations may exists with thread lengths, actual material finish and dimensions
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Dimensions:Differences may exist between batches such as head dimensions, thread lengths visible stamped head markings, qty's, appearance or actual finish
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Screw Gauge |
|---|---|
| Product | Self Tapping Screws Assortment Kit |
| Head Type | Pan Head |
| Kit Type | Self Tapping Screws |
| Size | 4g to 12g |
| Thread Type | Coarse |
| Corrosion Protection Level | Moderate |
| Class / Grade | Low Tensile Class 4.6 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Sizes In Kit | 4g (2.9mm), 6g (3.5mm), 8g (4.2mm), 10g (4.8mm), 12g (5.4mm) |
| Self Tapper Size and Qty | 4g (2.9mm) x 16mm - 40 Pieces, 4g (2.9mm) x 19mm - 50 Pieces, 4g (2.9mm) x 25mm - 40 Pieces, 6g (3.5mm) x 10mm - 10 Pieces, 6g (3.5mm) x 16mm - 80 Pieces, 6g (3.5mm) x 30mm - 20 Pieces, 8g (4.2mm) x 9.5mm - 20 Pieces, 8g (4.2mm) x 16mm - 60 Pieces, 10g (4.8mm) x 16mm - 10 Pieces, 10g (4.8mm) x 25mm - 65 Pieces, 10g (4.8mm) x 30mm - 10 Pieces, 10g (4.8mm) x 38mm - 10 Pieces, 12g (5.5mm) x 19mm - 75 Pieces, 12g (5.5mm) x 25mm - 10 Pieces |
| Approx No of Pieces In Kit | 1 Kit contains approx 500 Pieces |
| Drive Type | Pozi |
| Packaging | Quality Polypropylene Case |
| Packaging Dimensions | W202 x D138 x H38mm |
| Country of Origin | Imported |
| Brand | Torres |