1/4" x 20 TPI BSW Coarse Brass 1 Piece Dome Nuts Low Tensile ANSI
$6.00
In stock
SKU
41DBW14
- Buy 2 for $4.50 each and save 25%
- Buy 5 for $3.60 each and save 40%
- Buy 10 for $2.60 each and save 57%
- Buy 20 for $2.20 each and save 63%
- Buy 30 for $1.70 each and save 72%
- Buy 50 for $1.40 each and save 77%
- Buy 75 for $1.30 each and save 78%
- Buy 100 for $1.10 each and save 82%
- Buy 200 for $1.00 each and save 83%
- Buy 500 for $0.85 each and save 86%
- Buy 700 for $0.80 each and save 87%
- Buy 1000 for $0.75 each and save 88%
- Hex Dome Acorn 1 Piece nuts can be used alone or as a cap for a hex or jam nut, dome nuts serve a decorative purpose by concealing the threaded end of a fastener or acting as a cover for protruding, perhaps sharp threads
- Also known as: Crown Nut, Blind Nut, Dome Cap Nut, Hex Cap Nuts, Acorn Nuts
- Material / Coating: Brass fasteners are used for their physical and aesthetic properties. Brass is utilised due to its high thermal conductivity and corrosion resistant properties. It is suitable for use in hot and cold environments, and resistant to water corrosion, making it a staple of industries such as heating and plumbing
- What does TPI stand for?: TPI stands for “threads per inch” which literally means the number of threads within each inch on a nut, a bolt, or a fastener. To determine the TPI of a nut, either count the number of threads contained within an inch of length on the male fastener or use a thread checker. If the male fastener is less than an inch, measure 1/2", count how many there are then multiply the number by 2
- Difference between UNC v BSW Threads: UNC and BSW have the same thread per inch value, except for the 1/2" size. Theoretical it would be possible to interchange them as they have the same amount of threads per inch. However due to the difference in thread angle, the connection would not be as strong as when using the proper combinations
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
| System of Measurement | Imperial |
|---|---|
| Product | Dome Acorn 1 Piece Nut |
| Size | 1/4" |
| Size & Thread Pitch | 1/4" x 20 TPI BSW |
| Thread Pitch | 20 TPI |
| Thread Direction | Right Hand |
| Thread Type | UNC / BSW - Coarse |
| Corrosion Protection Level | Ultimate |
| Class / Grade | Low Tensile Class 5 |
| Material | Carbon Steel |
| Across Flats (af) | 0.428 - 0.439" (10.88 - 11.16mm) |
| Across Corners (ac) | 0.488 - 0.505" (12.40 - 12.83mm) |
| Nut Height Overall (b) | 11.00mm |
| Hex Height (h) | 0.220" (5.50mm) |
| Internal Nut Depth (p) | 9.25mm |
| Spanner Size | 7/16" |
| Closest size in mm | M6 (6mm) |
| Standard Made To | ANSI |
| Brand | Holdite Industries |
We found other products you might like!
-
1/4" x 20 TPI BSW Coarse Brass Round Slot Machine Screws AS B50As low as $5.00
